Discussion in 'Test Version - Feedback' started by flarssen, May 17, 2007.

  1. flarssen

    flarssen New Member

    Sorry for asking in english, but I have a problem using settings for Simprop LipoControl on two Hyperion LBA10 (linked). Some telegrams are split in two. Every time this happens, logging is restarted.
    Works great with single LBA10.
    (Logview version 1.14.2)
    Feel free to answer in German:).

    Fred
    ---------------------------
    [09:43:21,262][L3 ][RxChar Daten ] <LF>õ<FF>I60F440F440F440F4A0F450F4605C3<CR> | Länge: 34
    [09:43:21,262][L3 ][RxChar ] `-> 186<LF>õ<FF>I60F440F440F440F4A0F450F4605C3<CR> | Länge: 40
    [09:43:22,284][L3 ][RxChar Daten ] <LF>õ<FF>I60F490F4E0F420F4C0F480F4705DD<CR> | Länge: 34
    [09:43:22,284][L3 ][RxChar ] `-> 187<LF>õ<FF>I60F490F4E0F420F4C0F480F4705DD<CR> | Länge: 40
    [09:43:23,295][L3 ][RxChar Daten ] <LF>õ<FF>I60F490F4C0F440F4C0F460F4605DA<CR> | Länge: 34
    [09:43:23,295][L3 ][RxChar ] `-> 188<LF>õ<FF>I60F490F4C0F440F4C0F460F4605DA<CR> | Länge: 40
    [09:43:24,316][L3 ][RxChar Daten ] <LF>õ<FF>I60F480F460F420F4C0F460F4805CC<CR> | Länge: 34
    [09:43:24,316][L3 ][RxChar ] `-> 189<LF>õ<FF>I60F480F460F420F4C0F460F4805CC<CR> | Länge: 40
    [09:43:25,188][L3 ][RxChar Daten ] <LF>õ<FF>I60F480F450F420F4D0F48 | Länge: 25
    [09:43:25,188][L3 ][RxChar ] `-> 190<LF>õ<FF>I60F480F450F420F4D0F48 | Länge: 31
    [09:43:25,658][L3 ][RxChar Daten ] 0F4705CD<CR> | Länge: 9
    [09:43:25,658][L3 ][RxChar ] `-> 1910F4705CD<CR> | Länge: 15
    [09:43:26,359][L3 ][RxChar Daten ] <LF>õ<FF>I60F460F460F450F4C0F470F4705CD<CR> | Länge: 34
    [09:43:26,359][L3 ][RxChar ] `-> 192<LF>õ<FF>I60F460F460F450F4C0F470F4705CD<CR> | Länge: 40
    [09:43:27,281][L3 ][RxChar Daten ] <LF>õ<FF>I60F440F4D0F450F4D0F460F4605D8 | Länge: 33
    [09:43:27,281][L3 ][RxChar ] `-> 193<LF>õ<FF>I60F440F4D0F450F4D0F460F4605D8 | Länge: 39
    [09:43:27,691][L3 ][RxChar Daten ] <CR> | Länge: 1
    [09:43:27,691][L3 ][RxChar ] `-> 194<CR> | Länge: 7
    [09:43:28,322][L3 ][RxChar Daten ] <LF>õ<FF>I60F450F4D0F440F4D0F460F4805DA<CR> | Länge: 34
    [09:43:28,322][L3 ][RxChar ] `-> 195<LF>õ<FF>I60F450F4D0F440F4D0F460F4805DA<CR> | Länge: 40

    ---------------------------
  2. Dominik

    Dominik Administrator Staff Member

    Well, actually I don´t have a useful solution for you. The only thing which might be possible is the serial timing.

    I will have a look to the INI file of the balancer. Maybe I can do something.
  3. flarssen

    flarssen New Member

    Seems to work with the following settings:

    [serielle Schnittstelle]
    Baudrate = 9600
    Datenbits = 8
    Stopbits = 0
    Parität = 0
    ## negative Clustersize bedeutet variable Länge ! ##
    ClusterSize = -100
    # wird benötigt wenn das Datenformat erweitert wird um korrekte Streminfos zu schreiben
    #ClusterErweiterung = 0
    LineEndChar = 13
    SetDTR = 0
    SetRTS = 1

    ## TimeOuts ##
    [Schnittstelle TimeOuts]
    ##DelayTime : in Mikrosekunden
    ##ExtraDelayTime : in Millisekunden
    RTOCharDelayTime = 200000
    RTOExtraDelayTime = 400
    WTOCharDelayTime = 50
    WTOExtraDelayTime = 500


    Can you explain how the delaytime values are used in the application?

    Fred
  4. Dominik

    Dominik Administrator Staff Member

    Hi Fred !

    Well these settings seem to be a little bit wide :) I think it would work with 4000 as well for RTOCharDelayTime.

    The settings ... Well that is not easy to explain ...
    R........ is for receive and W ...... is for Write.

    CharDelay is the time in ms which the serial component wait for a single character. ExtrayDelay is a value in µs which adds additional time to the whole receive / transmitting process.
    In most cases it is a little bit experimental to figure out the correct timings. ;)

    I will add a new device to the next LogView to enable double balancer usage. I think this will be the best solution.

Share This Page